|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
HCPL4503M -- High Speed Transistor Optocouplers August 2008 HCPL4503M High Speed Transistor Optocouplers Features VISO = 5kV RMS is standard for all devices High speed - 1MBit/s Superior CMR, CMH = 50kV/ms (typical); Description The HCPL4503M optocoupler consists of an AlGaAs LED optically coupled to a high speed photodetector transistor. A separate connection for the bias of the photodiode improves the speed by several orders of magnitude over conventional phototransistor optocouplers by reducing the base-collector capacitance of the input transistor. The base of the phototransistor is not bonded out to a pin for improved noise immunity. An internal noise shield provides superior common mode rejection of 15kV/s minimum. CML = 30kV/ms (typical) No base connection for improved noise immunity CTR guaranteed 0C to 70C U.L. recognized (File # E90700, Vol 2) VDE approval pending Applications Line receivers Pulse transformer replacement Output interface to CMOS-LSTTL-TTL Wide bandwidth analog coupling Schematic Package Outlines N/C 1 8 VCC 8 1 +2 V F 7 N/C _ 3 6 VO 8 1 8 1 N/C 4 5 GND (c)2005 Fairchild Semiconductor Corporation HCPL4503M Rev. 1.0.3 www.fairchildsemi.com HCPL4503M -- High Speed Transistor Optocouplers Absolute Maximum Ratings (TA = 25C unless otherwise specified) Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol TSTG TOPR TSOL EMITTER IF (avg) IF (pk) IF (trans) VR PD DETECTOR IO (avg) IO (pk) VCC VO PD Storage Temperature Parameter Operating Temperature Lead Solder Temperature DC/Average Forward Input Current Peak Forward Input Current (50% duty cycle, 1ms P.W.) Peak Transient Input Current - (1s P.W., 300pps) Reverse Input Voltage Input Power Dissipation Average Output Current Peak Output Current Supply Voltage Output Voltage Output Power Dissipation Value -40 to +125 -40 to +100 260 for 10 sec 25 50 1.0 5 100 8 16 -0.5 to 30 -0.5 to 20 100 Units C C C mA mA A V mW mA mA V V mW (c)2005 Fairchild Semiconductor Corporation HCPL4503M Rev. 1.0.3 www.fairchildsemi.com 2 HCPL4503M -- High Speed Transistor Optocouplers Electrical Characteristics (TA = 0 to 70C unless otherwise specified) Individual Component Characteristics Symbol EMITTER VF BVR VF / TA DETECTOR IOH Logic high output current IF = 0mA, VO = VCC = 5.5V, TA = 25C IF = 0mA, VO = VCC = 15V, TA = 25C IF = 0mA, VO = VCC = 15V ICCL ICCH Logic low supply current Logic high supply current IF = 16mA, VO = Open, VCC = 15V IF = 0mA, VO = Open, VCC = 15V, TA = 25C IF = 0mA, VO = Open, VCC = 15V *All Typicals at TA = 25C 120 0.001 0.005 0.5 1 50 200 1 2 A A A Input Forward Voltage Input Reverse Breakdown Voltage Temperature Coefficient of forward voltage IF = 16mA, TA = 25C IF = 16mA IR = 10A IF = 16mA 5.0 -1.6 1.45 1.7 1.8 V mV/C V Parameter Test Conditions Min. Typ.* Max. Unit Transfer Characteristics Symbol COUPLED CTR Current Transfer Ratio(5) IF = 16mA, VO = 0.4V, VCC = 4.5V, TA = 25C(1) IF = 16mA, VCC = 4.5V, VOL = 0.5V VOL Logic low output voltage output voltage IF = 16mA, IO = 3 mA, VCC = 4.5V, TA = 25C IF = 16mA, IO = 2.4mA, VCC = 4.5V *All Typicals at TA = 25C Note: 1. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current, IF, times 100%. 19 15 27 30 0.5 0.5 V 50 % Parameter Test Conditions Min. Typ.* Max. Unit (c)2005 Fairchild Semiconductor Corporation HCPL4503M Rev. 1.0.3 www.fairchildsemi.com 3 HCPL4503M -- High Speed Transistor Optocouplers Electrical Characteristics (Continued) (TA = 0 to 70C unless otherwise specified) Switching Characteristics (VCC = 5V) Symbol TPHL Parameter Propagation Delay Time to Logic Low Propagation Delay Time to Logic High Common Mode Transient Immunity at Logic High Common Mode Transient Immunity at Logic Low Test Conditions RL = 1.9k, IF = TA = 25C RL = 1.9k, IF = TA = 25C 16mA(2) (Fig. 7) Min. Typ.* 0.45 Max. 0.8 1.0 Unit s s s s V/s RL = 1.9k, IF = 16mA(2) (Fig. 7) TPLH 16mA(2) (Fig. 7) 0.3 0.8 1.0 RL = 1.9k, IF = 16mA(2) (Fig. 7) |CMH| IF = 0 mA, VCM = 1,500VP-P, TA = 25C, RL = 1.9k(3)(Fig. 8) IF = 16mA, VCM = 1,500VP-P, RL = 1.9k(3) (Fig. 8) 15,000 50,000 |CML| 15,000 30,000 V/s *All Typicals at TA = 25C Isolation Characteristics Symbol II-O Characteristics Input-Output Insulation Leakage Current Withstand Insulation Test Voltage Resistance (input to output) Capacitance (input to output) Test Conditions Relative humidity = 45%, TA = 25C, t = 5s, VI-O = 3000VDC(4) RH 50%, TA = 25C, II-O 2A, t = 1 min.(4) VI-O = 500VDC f = 1MHz(4) Min. Typ.** Max. 1.0 Unit A VISO RI-O CI-O 5,000 1012 0.6 VRMS pF Notes: 2. The 1.9k load represents 1 TTL unit load of 1.6mA and 5.6k pull-up resistor. 3. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge of the common mode pulse signal VCM, to assure that the output will remain in a logic high state (i.e., VO>2.0V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO<0.8V). 4. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted together. (c)2005 Fairchild Semiconductor Corporation HCPL4503M Rev. 1.0.3 www.fairchildsemi.com 4 HCPL4503M -- High Speed Transistor Optocouplers Typical Performance Curves Fig. 1 Normalized CTR vs. Forward Current 1.2 1.2 Fig. 2 Normalized CTR vs. Temperature 1.0 1.0 NORMALIZED CTR 0.8 NORMALIZED CTR 0.8 0.6 0.6 0.4 Normalized to: IF = 16mA 0.2 VO = 0.4V VCC = 5V TA = 25C 0.4 Normalized to: TA = 25C 0.2 IF = 16mA VCC = 5V VO = 0.4V 0.0 0.1 1 10 100 0.0 -60 -40 -20 0 20 40 60 80 100 IF - FORWARD CURRENT (mA) TA - TEMPERATURE (C) Fig. 3 Output Current vs. Output Voltage TA = 25C VCC = 5V IF = 40mA IF = 35mA 12 10 8 6 4 2 0 0 2 4 6 8 10 12 14 16 18 20 IF = 30mA IF = 25mA IF = 20mA IF = 15mA IF = 10mA IF = 5mA Fig. 4 Logic High Output Current vs. Temperature IOH - LOGIC HIGH OUTPUT CURRENT (nA) 1000 IF = 0mA VCC = 5V VO = 5V 100 16 14 IO - OUTPUT CURRENT (mA) 10 1 0.1 -60 -40 -20 0 20 40 60 80 100 VO - OUTPUT VOLTAGE (V) TA - TEMPERATURE (C) Fig. 5 Propagation Delay vs. Temperature 800 700 10000 Fig. 6 Propagation Delay vs. Load Resistance Tp - PROPAGATION DELAY (ns) 600 RL = 4.1k (TPLH) 500 RL = 4.1k (TPLH) 400 300 200 100 0 -60 IF = 16mA VCC = 5V RL = 1.9k (TPHL) RL = 1.9k (TPLH) TP - PROPAGATION DELAY (ns) IF - 10mA (TPHL) 1000 IF - 16mA (TPHL) IF - 16mA (TPLH) VCC = 5 V TA = 25C 10 IF - 10mA (TPLH) -40 -20 0 20 40 60 80 100 100 1 TA - TEMPERATURE (C) RL - LOAD RESISTANCE (k) (c)2005 Fairchild Semiconductor Corporation HCPL4503M Rev. 1.0.3 www.fairchildsemi.com 5 HCPL4503M -- High Speed Transistor Optocouplers Test Circuits 1 + Noise Shield Pulse Generator I F tr = 5ns Z O = 50 10% D.C. I/f < 100s 8 7 6 5 VCC +5 V 2 VF - N/C VO RL 3 I F Monitor Rm VO 0.1 F 4 GND C L = 1.5 F IF 0 VO 5V 1.5 V 1.5 V VOL TPHL TPLH Fig. 7 Switching Time Test Circuit IF 1 + Noise Shield 8 7 6 5 VCC +5 V 2 A B VFF VF - N/C VO RL 3 4 + VCM VO 0.1 F GND - - Pulse Gen VCM 10 V 10% tr VO 90% 90% 10% tf 5V 0V Switch at A : IF = 0 mA VO Switch at A : IF = 16 mA VOL Fig. 8 Common Mode Immunity Test Circuit (c)2005 Fairchild Semiconductor Corporation HCPL4503M Rev. 1.0.3 www.fairchildsemi.com 6 HCPL4503M -- High Speed Transistor Optocouplers Package Dimensions Through Hole PIN 1 ID. 4 3 2 1 4 3 2 1 0.4" Lead Spacing PIN 1 ID. 0.270 (6.86) 0.250 (6.35) 5 6 7 8 0.270 (6.86) 0.250 (6.35) 0.390 (9.91) 0.370 (9.40) 5 6 7 8 SEATING PLANE 0.070 (1.78) 0.045 (1.14) 0.200 (5.08) 0.140 (3.55) 0.020 (0.51) MIN SEATING PLANE 0.390 (9.91) 0.370 (9.40) 0.070 (1.78) 0.045 (1.14) 0.200 (5.08) 0.140 (3.55) 0.004 (0.10) MIN 0.154 (3.90) 0.120 (3.05) 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP 0.016 (0.40) 0.008 (0.20) 15 MAX 0.300 (7.62) TYP 0.154 (3.90) 0.120 (3.05) 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP 0.016 (0.40) 0.008 (0.20) 0 to 15 0.400 (10.16) TYP Surface Mount 0.390 (9.91) 0.370 (9.40) 4 3 2 1 8-Pin DIP - Land Pattern 0.070 (1.78) PIN 1 ID. 0.270 (6.86) 0.250 (6.35) 0.060 (1.52) 5 6 7 8 0.100 (2.54) 0.295 (7.49) 0.415 (10.54) 0.030 (0.76) 0.070 (1.78) 0.045 (1.14) 0.020 (0.51) MIN 0.300 (7.62) TYP 0.016 (0.41) 0.008 (0.20) 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP Lead Coplanarity : 0.004 (0.10) MAX 0.045 (1.14) 0.315 (8.00) MIN 0.405 (10.30) MAX. Note: All dimensions are in inches (millimeters) (c)2005 Fairchild Semiconductor Corporation HCPL4503M Rev. 1.0.3 www.fairchildsemi.com 7 HCPL4503M -- High Speed Transistor Optocouplers Ordering Information Option No Option S SD T V TV SV SDV Example Part Number HCPL4503M HCPL4503SM HCPL4503SDM HCPL4503TM HCPL4503VM HCPL4503TVM HCPL4503SVM HCPL4503SDVM Description Standard Through Hole Surface Mount Lead Bend Surface Mount; Tape and Reel 0.4" Lead Spacing VDE0884 VDE0884; 0.4" Lead Spacing VDE0884; Surface Mount VDE0884; Surface Mount; Tape and Reel Marking Information 1 4503 V 3 4 2 6 XX YY 5 B Definitions 1 2 3 4 5 6 Fairchild logo Device number VDE mark (Note: Only appears on parts ordered with VDE option - See order entry table) Two digit year code, e.g., `03' Two digit work week ranging from `01' to `53' Assembly package code (c)2005 Fairchild Semiconductor Corporation HCPL4503M Rev. 1.0.3 www.fairchildsemi.com 8 HCPL4503M -- High Speed Transistor Optocouplers Carrier Tape Specifications D0 K0 t P0 P2 E A0 W1 B0 F W d User Direction of Feed P D1 Symbol W t P0 D0 E F P2 P A0 B0 K0 W1 d R Pocket Pitch Tape Width Description Tape Thickness Sprocket Hole Pitch Sprocket Hole Diameter Sprocket Hole Location Pocket Location Dimension in mm 16.0 0.3 0.30 0.05 4.0 0.1 1.55 0.05 1.75 0.10 7.5 0.1 4.0 0.1 12.0 0.1 10.30 0.20 10.30 0.20 4.90 0.20 Pocket Dimensions Cover Tape Width Cover Tape Thickness Max. Component Rotation or Tilt Min. Bending Radius 1.6 0.1 0.1 max 10 30 Reflow Profile 300 Temperature (C) 250 200 150 100 50 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Time (Minute) * Peak reflow temperature: 260 C (package surface temperature) * Time of temperature higher than 183 C for 160 seconds or less * One time soldering reflow is recommended Time above 183C, <160 sec Ramp up = 2-10C/sec 260 C peak 245 C, 10-30 s (c)2005 Fairchild Semiconductor Corporation HCPL4503M Rev. 1.0.3 www.fairchildsemi.com 9 HCPL4503M -- High Speed Transistor Optocouplers TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. Build it NowTM CorePLUSTM CorePOWERTM CROSSVOLTTM CTLTM Current Transfer LogicTM EcoSPARK(R) EfficentMaxTM EZSWITCHTM * TM (R) Fairchild(R) (R) Fairchild Semiconductor FACT Quiet SeriesTM FACT(R) FAST(R) FastvCoreTM FlashWriter(R) * FPSTM F-PFSTM FRFET(R) SM Global Power Resource Green FPSTM Green FPSTMe-SeriesTM GTOTM IntelliMAXTM ISOPLANARTM MegaBuckTM MICROCOUPLERTM MicroFETTM MicroPakTM MillerDriveTM MotionMaxTM Motion-SPMTM OPTOLOGIC(R) OPTOPLANAR(R) (R) PDP SPMTM Power-SPMTM PowerTrench(R) Programmable Active DroopTM QFET(R) QSTM Quiet SeriesTM RapidConfigureTM Saving our world, 1mW at a timeTM SmartMaxTM SMART STARTTM SPM(R) STEALTHTM SuperFETTM SuperSOTTM -3 SuperSOTTM -6 SuperSOTTM -8 SupreMOSTM SyncFETTM (R) The Power Franchise (R) TinyBoostTM TinyBuckTM (R) TinyLogic TINYOPTOTM TinyPowerTM TinyPWMTM TinyWireTM SerDesTM UHC(R) Ultra FRFETTM UniFETTM VCXTM VisualMaxTM * EZSWITCHTM and FlashWriter(R) are trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Preliminary No Identification Needed Obsolete Product Status Formative / In Design First Production Full Production Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I35 (c)2005 Fairchild Semiconductor Corporation HCPL4503M Rev. 1.0.3 www.fairchildsemi.com 10 |
Price & Availability of HCPL4503M08 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |